Instructions on starting your NKD with the override switch after not riding for some time.
To start your bike, bring the the Digital Key within 4cm proximity of the control box sensor and your NKD will power ON.
If you have not ridden for a while, you may find the vehicle not powering on by Digital Key.
In this case you should:
- Open the saddle
- Simultaneously press on the under-saddle override switch while tapping the Digital Key to control box sensor
- Once the bike has powered ON close the saddle and you're ready to ride!
Never try starting your NKD with the Master key (RED). This is only for programming new keys and will not work. If used in error, please contact your nearest FONZ authorised service centre.